Water Based Floor Finish
WOCA Optima is a clear, one component water-based finish that will provide a durable and liquid resistant surface for your home or commercial space. Its 1 component formulation means there is no mixing and waste generated by the addition of hardeners.
Optima finish offers superior protection against wear, water and chemicals, all while remaining non-yellowing and helps protect the wood from harmful UV rays. The high build, self-leveling technology ensures an even application,and great results. Optima, your Optimal choice for a beautiful and lasting satin finish.
Product Details
WOCA Optima Water Based Floor Finish. For finishing new, untreated and newly-sanded wood floors in residential and medium commercial traffic areas. Ideal for all types of wood.
- Residential and medium commercial traffic
- 1 component
- Low odor
- Indoor climate labeled
- Satin finish
Application Instructions
Instructions
It is important that both wood and floor finish have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 100-120 sandpaper or sanding pad. Vacuum thoroughly and tack the floor afterwards, using a tightly-wrung water-soaked mop/cloth. The floor must be completely dry before sealing or finishing. When sealing, use WOCA Sealers for newly sanded wood to reduce side bonding.
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
- 1 coat of Sealer and 1 coat of Optima floor finish should be applied undiluted, using a brush or roller. Leave the surface to dry until the next day.
- Sand the surface with 120-180 and vacuum clean the surface thoroughly.
Apply the final coat of undiluted Optima.
Water and other liquids, such as red wine and coffee, must be wiped off immediately to prevent staining.
Maintenance & Cleaning
Do not place furniture etc. on the floor until at least 24 hours after the final coat of floor finish. The floor will be ready for normal use after approx. 5-7 days, after which rugs etc. can be placed on the floor.If drying times are not followed, this can result in poor adhesion and reduced resistance. For each coat of floor finish, drying times will be increased. High temperature and low air humidity will reduce drying times. Low temperature and high air humidity will extend drying times.
Technical
Technical
| VOC | 50 g/l (max) |
| Shelf Life | 2 years |
| Application temperature | 15-25°C and approx. 50% air humidity. |
| Coverage | 325-410 sq ft/gal |
| Colours | Colourless (Satin) |
| Cleaning of Tools | water |
| Storage | 10-25°C Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer. |
| Packaging | 1 Gal (+ 2oz Hardener) |
| Viscosity | 20-25 Sec. DIN Cup 4 |
| Between Coats | 2-3 hours at 20°C |
| Light use | After 4-6 hrs at 20°C |
| Fullt Hard | 7 Days at 20°C |
Download
Related Products
