WOCA Driftwood Lye is a water based product that give the wood a wood a unique, weather-beaten patina. The product is for use only on oak wood. By using WOCA Driftwood Lye, the wood will develop a very nice, 2-dimensional appearance. After using WOCA Driftwood Lye, the wood surface must be treated with one of the WOCA finishing oils. Results vary.

*PLEASE NOTE * Due to the Sodium Hydroxide found in Antique Oak Lye the product has been deemed hazardous by Transport Canada and requires special documentation and transportation. A Hazmat Fee is required for shipping.

1. Use suitable safety gloves and glasses during application.
2. The surface needs light sanding and must be clean and dry. We recommend a full sanding using 100-120 grit sandpaper. Please note that the sanding, as best as possible, must take place immediately before the application of the lye.
3. Shake container well.  Pour the lye into a plastic paint tray. Make sure there are no pigments left in the container. During the application process, stir the lye periodically.
4. Apply the lye undiluted in an even coat using a lye-resistant brush or paint roller.  Apply along the grain of the wood, using at least 1 litre per 9 square metre. When working on vertical surfaces, work from top to bottom.
5. Usually, the wood will be dry after 24 hours at 20° C (68° F). After complete drying, use a polishing machine with either a green or red pad for de-nibbing. Remove the sanding dust with a vacuum cleaner.
6. Complete the treatment by applying one of the WOCA oils.

Driftwood Lye Instructions

TDS Download

SDS Download