Invisible Oil is a water-based single-component low-odour floor oil that is made from the very best quality ingredients. This means extremely tough protection and gives the wood a matte, untreated appearance when used together with WOCA Invisible Oil Primer. The oil is particularly well-suited for machine polishing of light wood varieties, both untreated and newly-sanded. Invisible Oil is the second stage in a high quality water-based oiling system and must be used together with WOCA Invisible Oil Primer. 

WOCA Invisible Oil Application Instructions

1. Thoroughly shake the container of oil, both before and during use. Containers with different batch numbers should be mixed to avoid colour mismatch.
2. Apply Invisible Oil using a short-bristled paint roller in an even coat. Work in small areas of no more than 20 m² at a time.
3. Leave the oil to soak in for up to 5 minutes.
4. Rub the oil into the wood until the floor appears saturated. Use a buffing machine with a beige or maroon pad. Regularly change the buffing pad to prevent the oil from lumping.
5. Remove excess oil with dry, lint-free cotton cloths or pads attached to the polishing machine until the surface no longer appears wet.
6. The surface can be used with caution the following day and is fully hardened after 7 days under normal indoor conditions.

Do not expose the floor to water or other liquids for the first 7 days, while the oil is hardening. After 24 hours, we recommend that the surface is treated with Invisible Oil Care to improve the floor’s resistance to stains and wear.

Weekly cleaning: Natural Soap White

Monthly cleaning: Oil Refreshing Soap White

Re-oiling Maintenance: Intensive Wood Cleaner + Invisible Oil Care

• Drying time:  8 hours at 20°C
• Fully hard:  7 days at 20°C