WOCA RP 2K Waterbased Finish preserves the natural beauty of freshly sanded wood while shielding it from daily wear. Achieve exceptional results with its easy-to-use, ultra-matte application designed for light colored wood. Formulated with non-yellowing resins and added UV absorbers, this high quality waterbased finish will keep your floor looking its best for years.
One of the key features of WOCA RP2K finish and hardener is that they are formulated with health and safety in mind. Unlike other 2K products on the market, WOCA RP2K's hardener is safe and non-toxic to use. Discover the perfect raw wood look finish for all your wood projects.
Product Details
WOCA RP 2K + Hardener Water Based Floor Finish
- Gives the floor a raw, bare wood appearance and feel
- Ultra-matte sheen
- Indoor climate labeled
- IBR-certified
- Pure 2K Hardener (isocyanate and aziridine free)
Application Instructions
It is important that both wood and finish have a temperature of min. 15°C (preferably around 20°C) and air humidity of approx. 50%. Make sure that the room is well-ventilated for optimal evaporation and drying time. For the final sanding to bare wood, use grit 120-150 sandpaper or sanding pad. Vacuum thoroughly and tack the floor afterwards with a tightly-wrung water-soaked cloth. The floor should be completely dry before application of WOCA RP 2K
Always remember to test on a less visible spot to check the compatibility of the surface with the product.
- Mix WOCA 2K Pure hardener with the WOCA RP 2K Finish and shake thoroughly before use. Leave the mixture to stand for ten minutes before use, to allow the hardener to activate.
- Apply a coat of the mixture with a paint roller or brush and leave the floor to dry for 2-3 hours.
- Apply the second coat and leave the surface to dry until the next day. The floor can be sanded after .
- Sand the surface with 120-150 and vacuum clean the surface thoroughly.
- Apply the final coat of WOCA RP 2K with hardener (freshly mixed).
Water and colored fluids, such as red wine and coffee, must be wiped off immediately to prevent staining.
Maintenance & Cleaning
The freshly-Finished floor is suitable for cautious use after approx. 12 hours. Do not place furniture etc. on the floor until at least 24 hours after the final coat of floor finish. The floor will be ready for normal use after approx. 8 days, after which rugs etc. can be placed on the floor.
Technical
Technical
| VOC | 90 g/l (max) |
| Shelf Life | 2 years |
| Application temperature | 15-25°C and approx. 50% air humidity. |
| Coverage | 254-410 sq ft/gal |
| Colours | Colourless (ultra-matte) |
| Cleaning of Tools | water |
| Storage | 10-25°C Keep out of reach of children. Do not expose to heat (e.g. sunlight). Store frost-free during winter and cool during summer. |
| Packaging | 1 Gal (+ 2oz Hardener) |
| Viscosity | 30-35 Sec. DIN Cup 4 |
| Pot Life | The mixture must be used within 48 hours. Shake/stir thoroughly before use. |
| Mixing Ratio | 2% or 3.381 FL.OZ. to 169.070 FL.OZ. water based finish. |
| Between Coats | 2-3 hours at 20°C |
| Light use | After 24 hrs at 20°C |
| Fullt Hard | 8 Days at 20°C |
Download
Related Products
